溫馨提示：需求數量不同，價格不同。請聯系我們，確認當前新的報價！
REFPROP是一款用于制冷劑物性查詢的軟件。它是一款工質物性計算軟件，該軟件由美國標準技術研究所(NIST)研制開發。從檢索到的文獻來看，REFPROP被很多研究項目用作物性數據源，或作為計算結果性的參考數據源。
REFPROP版本10的新功能
NIST REFPROP程序的大部分功能都已得到增強，圖形界面，Excel電子表格，F(xiàn)ortran文件（即核心屬性例程），C ++，MATLAB，VB等中的示例程序以及流體。下面列出了一些的改進：
· 提高計算速度。
· 新的功能，允許用戶使用相同的命令調用Refprop來處理輸入/輸出屬性，而學習TPFLSH，THERM等的輸入/輸出。
· 新的快捷命令來加載流體和混合物和方法來地使用代碼。
· Gernert混合模型用于選定的混合物與水，水+ CO2和濕空氣。
· Mac的新DLL;這允許使用Refprop，例如Excel 2011和2016的Mac版本。
· 氨，氦和重水的新的參考方程式。
· 加入下列流體：氯氣，二氯乙烷，乙二醇，環氧乙烷，十六烷，二十二烷，R1233zd（E），R1243zf，R1336mzz（Z）和氯乙烯。
· 已經對環戊烷，D4，庚烷，己烷，氯化氫，硫化氫，異戊烷，MDM，MM，辛烷，戊烷，R161，R245fa，R32，RE347mcc（HFE-7000），二氧化硫和氙。
· 提高了氨/水和乙二醇/水的度的新混合物模型。
· （R），R125，R134a和R1234ze（E），R1234ze（E）與R125和R134a以及CO2 / R1216的R1234yf配合（或改裝）混合物參數
· 對二元混合物（正構烷烴+正構烷烴混合物，與二氧化碳的混合物）選定系列的新估算方案，以獲得尚未擬合的混合物的估計相互作用參數。
· 亨利的恒定估計方案，以獲得更好的VLE起始值的混合物。
· Fortran代碼都經過了高度，增加了新的注釋來解釋代碼的工作。
· 識別用于確定相位的III型混合物的附加代碼。
· 丙酮，苯，1-丁烯，二氧化碳，硫化羰，順式丁烯，環己烷，環戊烷，環戊烷，D4，D5，D6，二氯乙烷，乙醚，碳酸二甲酯，二十二烷，乙烯，環己烷，異丙烷，異戊烷，間二甲苯，MD2M，MD3M，MD4M，MDM，MM， R114，R161，R1233zd（E），R1234yf，R1234ze（Z），R1243zf，R245fa，RE143a，RE347mcc，R40，反式丁烯，甲苯，十一烷和氯乙烯。
· 固定氫或氦混合物的傳輸中的缺陷。
· 純液體的大多數表面張力方程已被更新。
· 用于混合物的新的表面張力模型的不確定性較低。
· 用于計算文丘里噴嘴形成熱量和質量流量的新代碼。
操作系統要求: PC運行Windows XP，7，8，或10; 10.0 MB 可用硬盤空間
英文簡介
New Features of REFPROP Version 10
· Enhancements have been made to most areas of the NIST REFPROP program, including the equations of state for many of the pure fluids and mixtures, the transport equations, the graphical interface, the Excel spreadsheet, the Fortran files (i.e., core property routines), the sample programs in Python, C++, MATLAB, VB, etc. Some of the more important improvements are listed below:
· A new Excel file with many more examples and additional documentation.
· All of the Fortran code was highly optimized resulting in increased calculation speed and improved convergence. Many new flags were added to allow the user to specify better how the programs works.
· A new function is available to allow users to call Refprop with one single command that replaces most other calls from 9.1 (thus removing the need to learn what routines to use and the inputs/outputs for each routine, such as TPFLSH, THERM, etc.) However, the old routines are still available for backwards compatibility.
· New shortcut keywords to load fluids and mixtures and other methods to simplify use of the code.
· New shared library for the Mac; this allows use of Refprop with, for example, Python or Excel 2011. A CMake?based build system allows for compilation on any platform (windows, OSX, Linux).
· The vapor?liquid equilibrium calculations for tracing isotherms and isobars (T?x and p?x diagrams) are greatly improved (doi: https://doi.org/10.1002/aic.16074).
· New reference equations of state for ammonia, helium, and heavy water. The ammonia equation of state introduces the first change to the Helmholtz energy functional form in over 25 years of development of equations for the thermodynamic properties of fluids.
· The addition of the following refrigerants: R1123, R1224yd(Z), R1233zd(E), R1234ze(Z), R1243zf, and R1336mzz(Z).
· The addition of the following fluids: 1,3?butadiene, 1?butyne, 1?pentene, 2,2?dimethylbutane, 2,3?dimethylbutane, 3?methylpentane, acetylene, chlorine, chlorobenzene, cyclobutene, 1,2?dichloroethane, diethanolamine, docosane, ethylene glycol, ethylene oxide, hexadecane, monoethanolamine, perfluorohexane, propadiene, propylene oxide, and vinyl chloride.
· New equations of state have been developed for cyclopentane, D4, heptane, hexane, hydrogen chloride, MDM, MD2M, MM, neon, octane, pentane, perfluorobutane, perfluoropentane, R?1233zd(E), R?161, R?245fa, R?E347mcc (HFE?7000), and sulfur dioxide. The development of an equation of state is a complex process requiring many months of work for each one.
· Mixture model of Gernert implemented for selected mixtures with water, including water+CO2 and moist air.
· Transport equations have been added or modified for acetone, acetylene, ammonia, benzene, butane, 1,3?butadiene, 1?butene, 1?butyne, 2,2?dimethylbutane, 2,3?dimethylbutane, carbon dioxide, carbon monoxide, carbonyl sulfide, chlorine, chlorobenzene, cis?butene, cyclobutene, cyclohexane, cyclopentane, cyclopropane, D4, D5, D6, 1,2?dichloroethane(R150), diethanolamine, diethyl ether, dimethyl carbonate, dimethyl ether, docosane, ethane, ethylbenzene, ethylene, ethylene glycol, ethylene oxide, fluorine, heptane, hexane, hexadecane, hydrogen chloride, hydrogen sulfide, isobutene, isohexane, isooctane, isopentane, krypton, methyl palmitate, methyl linolenate, methyl linoleate, methyl oleate, methyl stearate, m?xylene, MD2M, MD3M, MD4M, MDM, MM, methylcyclohexane, 3?methylpentane, monoethanolamine, neon, neopentane, nitrous oxide, Novec?649, o?xylene, p?xylene, pentane,1?pentene, propadiene, propylcyclohexane, propylene, propylene oxide, propyne, perfluorobutane, perfluoropentane, perfluorohexane, propane, R1123, R143a, R114, R161, R1224yd(Z), R1233zd(E), R1234yf, R1234ze(Z), R1234ze(E), R1243zf, R13I1 (CF3I), R1336mzz(Z), R218, R236fa, R236ea, R245ca, R245fa, R365mfc, RE143a, RE245cb2, RE245fa2,RE347mcc, RC318, R40, sulfur dioxide, trans?butene, toluene, undecane, vinyl chloride, and xenon.
· New mixture models for ammonia + water and ethylene glycol + water.
· Approximately 400 binary pairs have been added from the work of Bell and Lemmon (doi: https://pubs.acs.org/doi/abs/10.1021/acs.jced.6b00257 ) ? Mixture parameters were fitted (or refitted) for the following binary mixtures: R1234yf with R32, R125, R134a, and R1234ze(E), R1234ze(E) with R125 and R134a, and many others. These new mixing parameters with R1234yf and R1234ze(E) are currently the standard used in the refrigeration industry and Version 10 puts all users in compliance with the property values now in use world?wide. All new ASHRAE predefined mixtures except those with trans?1,2?dichloroethylene (t?EDC) (due to the lack of a pure fluid equation) are included.
· New estimation schemes were developed for selected families of binary mixtures (n?alkane + n?alkane mixtures, mixtures with CO2, etc.) to obtain estimated interaction parameters for mixtures that have not been fitted.
· A reverse Polish type notation was added to read any functional form for the transport properties, eliminating the need to compile a new DLL as new correlations are published. The notation and corresponding coefficients of the equation are simply added to the fluid files and the new code will read and interpret the supplied text.
· The DOI for each primary equation was added to the fluid files. A link in the GUI is now available to load the publication if access to the journal is available.
· Henry's constant estimation scheme to obtain better starting values for VLE of mixtures to improve convergence.
· Additional code to identify type III mixtures for use in phase determination.
· Most surface tension equations for the pure fluids have been updated, and an improved surface tension model for mixtures was added.
· New code to calculate heat of formation or the mass flux for a Venturi nozzle.
Version 10.0 includes 147 pure fluids, 5 pseudo-pure fluids (such as air), and mixtures with up to 20 components:
· The typical natural gas constituents methane, ethane, propane, butane, isobutane, pentane, isopentane, hexane, isohexane, 2,2-dimethylbutane, 2,3-dimethylbutane, 3-methylpentane, heptane, octane, isooctane, nonane, decane, undecane, dodecane, carbon dioxide, carbon monoxide, hydrogen, nitrogen, and water.
· The hydrocarbons 1,3-butadiene, 1-butene, 1-butyne, 1-pentene, acetone, acetylene, benzene, butene, cis-butene, cyclobutene, cyclohexane, cyclopentane, cyclopropane, docosane, ethylene, hexadecane, isobutene, methylcyclohexane, neopentane, propadiene, propylcyclohexane, propyne, toluene, and trans-butene.
· The HFCs R23, R32, R41, R125, R134a, R143a, R152a, R161, R227ea, R236ea, R236fa, R245ca, R245fa, R365mfc, R1123, R1224yd(Z), R1233zd(E), R1234yf, R1234ze(E), R1234ze(Z), R1243zf, and R1336mzz(Z).
· The refrigerant ethers RE143a, RE245cb2, RE245fa2, and RE347mcc (HFE-7000).
· The HCFCs R21, R22, R123, R124, R141b, and R142b.
· The traditional CFCs R11, R12, R13, R113, R114, and R115.
· The fluorocarbons R14, R116, R218, R1216, C4F10, C5F12, C6F14, and RC318.
· The "natural" refrigerants ammonia, carbon dioxide, propane, isobutane, and propylene.
· The main air constituents nitrogen, oxygen, and argon.
· The noble elements helium, argon, neon, krypton, and xenon.
· The cryogens argon, carbon monoxide, deuterium, krypton, neon, nitrogen trifluoride, nitrogen, fluorine, helium, methane, oxygen, normal hydrogen, parahydrogen, and orthohydrogen.
· Water (as a pure fluid, or mixed with ammonia).
· Ethylene glycol (as a pure fluid, or mixed with water).
· The fluids carbonyl sulfide, chlorine, chlorobenzene, dichloroethane, diethanolamine, diethyl ether, dimethyl carbonate, dimethyl ether, ethanol, ethylene oxide, heavy water, hydrogen chloride, hydrogen sulfide, methanol, methyl chloride, monoethanolamine, nitrous oxide, Novec-649, propylene oxide, sulfur dioxide, sulfur hexafluoride, trifluoroiodomethane, and vinyl chloride.
· The xylenes m-xylene, o-xylene, p-xylene, and ethylbenzene.
· The FAMES (fatty acid methyl esters, i.e., biodiesel constituents) methyl oleate, methyl palmitate, methyl stearate, methyl linoleate, and methyl linolenate.
· The siloxanes octamethylcyclotetrasiloxane, decamethylcyclopentasiloxane, dodecamethylcyclohexasiloxane, decamethyltetrasiloxane, dodecamethylpentasiloxane, tetradecamethylhexasiloxane, octamethyltrisiloxane, and hexamethyldisiloxane.
· 121 predefined mixtures (such as R407C, R410A, and air); the user may define and store others.
